[img]http://bonsaiforum.gr/images/smilies/text/+1.gif[/img]Harris έγραψε:+1florian έγραψε:Ich bin wirklich sehr gespannt auf die ersten Bilder deiner Megalandschaft
Περιμένω με ανυπομονησία τις πρώτες φωτογραφιες!
Landscape Project 2013/2014
-
- Imperial
- Δημοσιεύσεις: 1335
- Εγγραφή: 09 Απρ 2012, 14:44
- Has thanked: 9 times
- Been thanked: 25 times
Re: Landscape Project 2013/2014
-
Topic author - Shohin
- Δημοσιεύσεις: 279
- Εγγραφή: 27 Ιαν 2014, 08:30
- Τοποθεσία: Bavaria
- Has thanked: 0
- Been thanked: 0
Re: Landscape Project 2013/2014
I'm already in the preparations with the trees ...
looks beautiful when they are all so in series
Bin schon in den Vorbereitungen mit dem Bäumen...
sieht schön aus, wenn sie alle so in Reihe stehen
looks beautiful when they are all so in series
Bin schon in den Vorbereitungen mit dem Bäumen...
sieht schön aus, wenn sie alle so in Reihe stehen
Δεν έχετε τα απαραίτητα δικαιώματα για να δείτε τα συνημμένα αρχεία σε αυτή τη δημοσίευση.
My Facebook Address:
https://www.facebook.com/uwe.zeiler.14
https://www.facebook.com/uwe.zeiler.14
-
- Συντονιστής
- Δημοσιεύσεις: 6682
- Εγγραφή: 26 Δεκ 2009, 21:37
- Τοποθεσία: Athens
- Has thanked: 82 times
- Been thanked: 136 times
- Επικοινωνία:
Re: Landscape Project 2013/2014
+1florian έγραψε:Ich bin wirklich sehr gespannt auf die ersten Bilder deiner Megalandschaft
Περιμένω με ανυπομονησία τις πρώτες φωτογραφιες!
-
Topic author - Shohin
- Δημοσιεύσεις: 279
- Εγγραφή: 27 Ιαν 2014, 08:30
- Τοποθεσία: Bavaria
- Has thanked: 0
- Been thanked: 0
Re: Landscape Project 2013/2014
Myself am curious how it is ......
Bin selber gespannt wie es wird......
Bin selber gespannt wie es wird......
My Facebook Address:
https://www.facebook.com/uwe.zeiler.14
https://www.facebook.com/uwe.zeiler.14
-
- Συντονιστής
- Δημοσιεύσεις: 4491
- Εγγραφή: 15 Οκτ 2010, 13:05
- Τοποθεσία: Αθηνα
- Has thanked: 323 times
- Been thanked: 242 times
- Επικοινωνία:
Re: Landscape Project 2013/2014
[img]http://bonsaiforum.gr/images/smilies/text/bravo.gif[/img]
+1[img]http://bonsaiforum.gr/images/smilies/ha ... flower.gif[/img]florian έγραψε:Ich bin wirklich sehr gespannt auf die ersten Bilder deiner Megalandschaft
Περιμένω με ανυπομονησία τις πρώτες φωτογραφιες!
-
Topic author - Shohin
- Δημοσιεύσεις: 279
- Εγγραφή: 27 Ιαν 2014, 08:30
- Τοποθεσία: Bavaria
- Has thanked: 0
- Been thanked: 0
Re: Landscape Project 2013/2014
Hello Florian,
because I work in the background and prepare the trees just ahead.
That's over 8 juniper .. that need cleaned out and wire are applied.
A lot of work.
Hallo Florian,
da arbeite ich im Hintergrund und bereite die Bäume gerade vor.
Das sind über 8 Wacholder..die müssen ausgeputzt und Draht angelegt werden.
Eine menge arbeit.
because I work in the background and prepare the trees just ahead.
That's over 8 juniper .. that need cleaned out and wire are applied.
A lot of work.
Hallo Florian,
da arbeite ich im Hintergrund und bereite die Bäume gerade vor.
Das sind über 8 Wacholder..die müssen ausgeputzt und Draht angelegt werden.
Eine menge arbeit.
My Facebook Address:
https://www.facebook.com/uwe.zeiler.14
https://www.facebook.com/uwe.zeiler.14
-
Topic author - Shohin
- Δημοσιεύσεις: 279
- Εγγραφή: 27 Ιαν 2014, 08:30
- Τοποθεσία: Bavaria
- Has thanked: 0
- Been thanked: 0
Re: Landscape Project 2013/2014
I will use different plants.
Main plant will be
about 9 piece Juniperus Chinenis .....
Additional plants: Cotonoeaster and Juniperis procumbens nana
And much much moss .....
Main plant will be
about 9 piece Juniperus Chinenis .....
Additional plants: Cotonoeaster and Juniperis procumbens nana
And much much moss .....
Δεν έχετε τα απαραίτητα δικαιώματα για να δείτε τα συνημμένα αρχεία σε αυτή τη δημοσίευση.
My Facebook Address:
https://www.facebook.com/uwe.zeiler.14
https://www.facebook.com/uwe.zeiler.14
-
- Συντονιστής
- Δημοσιεύσεις: 2741
- Εγγραφή: 07 Μαρ 2011, 03:27
- Τοποθεσία: Περιστέρι, Αττικής
- Has thanked: 16 times
- Been thanked: 47 times
Re: Landscape Project 2013/2014
Good evening Merlin!
I think the final rock arrangement is much better than in the virtual![img]http://www.bonsaiforum.gr/richedit/smil ... oIM/65.gif[/img]
Your idea of attaching the rocks with expanding foam is really inspiring as it adds no more weight to the construction!
Have you thought of using zuisho pines instead of junipers and to integrate dwarf rhododedrons and/or heathers to the saikei composition?
I think the final rock arrangement is much better than in the virtual![img]http://www.bonsaiforum.gr/richedit/smil ... oIM/65.gif[/img]
Your idea of attaching the rocks with expanding foam is really inspiring as it adds no more weight to the construction!
Have you thought of using zuisho pines instead of junipers and to integrate dwarf rhododedrons and/or heathers to the saikei composition?
Παναγιώτης
Σπεύδε βραδέως
"To see a world in a grain of sand And a heaven in a wild flower, Hold infinity in the palm of your hand, And eternity in an hour" W.Blake
Σπεύδε βραδέως
"To see a world in a grain of sand And a heaven in a wild flower, Hold infinity in the palm of your hand, And eternity in an hour" W.Blake
-
- Συντονιστής
- Δημοσιεύσεις: 6682
- Εγγραφή: 26 Δεκ 2009, 21:37
- Τοποθεσία: Athens
- Has thanked: 82 times
- Been thanked: 136 times
- Επικοινωνία:
Re: Landscape Project 2013/2014
+1000Καραγιωργος Α έγραψε:Πως και πως περιμενα κατι τετοιο !!!
Αντε να ψηνομαστε λιγο λιγο!!!
I would like to thank the vizitor from Germany!
Wonderful idea and beautiful rocks. I think that you have too many trees in your virtual landscape, but a virtual in the end is different from the real thing!
I am looking forward to this challenge!
-
- Imperial
- Δημοσιεύσεις: 678
- Εγγραφή: 01 Ιουν 2013, 23:27
- Τοποθεσία: Εύβοια
- Has thanked: 0
- Been thanked: 0
Re: Landscape Project 2013/2014
Πως και πως περιμενα κατι τετοιο !!!
Αντε να ψηνομαστε λιγο λιγο!!!
I would like to thank the vizitor from Germany!
Αντε να ψηνομαστε λιγο λιγο!!!
I would like to thank the vizitor from Germany!
-
Topic author - Shohin
- Δημοσιεύσεις: 279
- Εγγραφή: 27 Ιαν 2014, 08:30
- Τοποθεσία: Bavaria
- Has thanked: 0
- Been thanked: 0
Landscape Project 2013/2014
Hi,
For 2013 I have decided to start a rock or landscape project.
Together with my friend Klaus, we will now approach gradually to the cause.
What do we need?
First off, do you start thinking in what way you want to place the whole thing, so
what I imagine the whole Lawa stones. Do I use a plate made of clay? ...... I build me something from
Resin? ...... Possibly a stone slab to at the end is too heavy for sure if everything is on it once.
I Chose a concrete slab .... the exact composition of the material I know unfortunately
no ..... they've bought second hand. But the shape and size corresponded exactly to my expectations.
And you can wear this alone without problems ..... : lol:
Here's the top:
front
In the coming weeks I will build a stabilization which is placed under the plate.
so that I can wear all the design afterwards also with two long timbers or beams with a few people and
the whole is not going to break. For this purpose, but I still have to make thoughtful how we put it to me.
Here's a picture because you can see how big the disk is compared to my little appearance ...[img]http://www.bonsaiforum.gr/richedit/smil ... oIM/21.gif[/img]
Now to the stones ......
it is not easy to find suitable stones for over honks not when they should not weigh much,
but must have a certain size for such a project.
These Klaus got the stones from Africa ... more precisely from Tanzania ..... coming from the Lake Malawi.
Now we had a number of different stones ...... now began the puzzle.
How they fit together .... how do you get the best depth effect. etc.. etc. ..
Here are some pictures of the stones
-- 28 Ιαν 2014, 17:28 --
After the base ... so the plate is then ready times, the stones are put together and
fixed with flexible adhesive, as they stand like me then you like best.
A small glimpse into the future!
I have the stones all so laid on the floor, they go well together and then I consulted individually by each stone and made of groups an image. Then released with the photo-editing program, so I was able to create a virtual of the stones as they can be put on the plate.
Here is the Virtual
-- 28 Ιαν 2014, 17:32 --
Next, of course, makes you start thinking how I plant the whole thing.
As far as the top of the tallest stone, which is still variable, because this peak is a small stone
will still be placed on top. Thus, the flow direction is not changed.
My ideas about the plants go in the direction ... either use Itoegawa juniper
for the main area .... or possibly girl pines .... in any case I would like on the right side
a group of Ajan spruce set ....
Well ... is bad to imagine it .... right?
Just what happened to me ...... in my head I had in front of me .... but has implement Virtual Technically, this
lasted a while. But here's my rough idea as Virtual ......
-- 28 Ιαν 2014, 17:40 --
Preparations are in full swing ........ as already mentioned, we had to think about how we a
Create substructure to stabilize the actual disk.
First we started us a template of the main plate.
The first idea was to put a plate V2A High gloss underneath that has the same contours as the main plate only about 2 inches taller so that they overlap.
Our Berrechnungen showed, however, that the whole does not bend during transport of the whole, this V2A plate would be so thick that the weight is too great here, and the plate would have to be so thick that it would not look good to optically re-.
Therefore, we decided to choose a small plate where including 2 piece V2A tubes are longitudinally mounted around later with two tubes that can be inserted to be able to wear all without problems for the variant.
At the end of the substructure was created entirely made of V4A material. So very High quality.
Then both parts were connected with each other
-- 28 Ιαν 2014, 17:52 --
As a next step, the stones are needed. Just how do I attach the whole thing at different heights on the plate.
I decided to create the base for the expanding foam variant to only once.
After curing of the foam I attached the pieces with tape and screw hole on the front and back.
so .. here now for the first time finished with the stones.
All stones are fixed and hold .....
I will soon go out to get the plants to it and let's see how I best Placing in the spring.
To times to get a sense of the volume of trees.
-- 28 Ιαν 2014, 17:58 --
The planting is done in the spring of 2014 ...
Have decided on Juniper Chinensis.
Trees with beautiful movements
fine dead wood
the many material you can see on the pictures
Looking forward, when spring comes
Greeting Merlin
For 2013 I have decided to start a rock or landscape project.
Together with my friend Klaus, we will now approach gradually to the cause.
What do we need?
First off, do you start thinking in what way you want to place the whole thing, so
what I imagine the whole Lawa stones. Do I use a plate made of clay? ...... I build me something from
Resin? ...... Possibly a stone slab to at the end is too heavy for sure if everything is on it once.
I Chose a concrete slab .... the exact composition of the material I know unfortunately
no ..... they've bought second hand. But the shape and size corresponded exactly to my expectations.
And you can wear this alone without problems ..... : lol:
Here's the top:
front
In the coming weeks I will build a stabilization which is placed under the plate.
so that I can wear all the design afterwards also with two long timbers or beams with a few people and
the whole is not going to break. For this purpose, but I still have to make thoughtful how we put it to me.
Here's a picture because you can see how big the disk is compared to my little appearance ...[img]http://www.bonsaiforum.gr/richedit/smil ... oIM/21.gif[/img]
Now to the stones ......
it is not easy to find suitable stones for over honks not when they should not weigh much,
but must have a certain size for such a project.
These Klaus got the stones from Africa ... more precisely from Tanzania ..... coming from the Lake Malawi.
Now we had a number of different stones ...... now began the puzzle.
How they fit together .... how do you get the best depth effect. etc.. etc. ..
Here are some pictures of the stones
-- 28 Ιαν 2014, 17:28 --
After the base ... so the plate is then ready times, the stones are put together and
fixed with flexible adhesive, as they stand like me then you like best.
A small glimpse into the future!
I have the stones all so laid on the floor, they go well together and then I consulted individually by each stone and made of groups an image. Then released with the photo-editing program, so I was able to create a virtual of the stones as they can be put on the plate.
Here is the Virtual
-- 28 Ιαν 2014, 17:32 --
Next, of course, makes you start thinking how I plant the whole thing.
As far as the top of the tallest stone, which is still variable, because this peak is a small stone
will still be placed on top. Thus, the flow direction is not changed.
My ideas about the plants go in the direction ... either use Itoegawa juniper
for the main area .... or possibly girl pines .... in any case I would like on the right side
a group of Ajan spruce set ....
Well ... is bad to imagine it .... right?
Just what happened to me ...... in my head I had in front of me .... but has implement Virtual Technically, this
lasted a while. But here's my rough idea as Virtual ......
-- 28 Ιαν 2014, 17:40 --
Preparations are in full swing ........ as already mentioned, we had to think about how we a
Create substructure to stabilize the actual disk.
First we started us a template of the main plate.
The first idea was to put a plate V2A High gloss underneath that has the same contours as the main plate only about 2 inches taller so that they overlap.
Our Berrechnungen showed, however, that the whole does not bend during transport of the whole, this V2A plate would be so thick that the weight is too great here, and the plate would have to be so thick that it would not look good to optically re-.
Therefore, we decided to choose a small plate where including 2 piece V2A tubes are longitudinally mounted around later with two tubes that can be inserted to be able to wear all without problems for the variant.
At the end of the substructure was created entirely made of V4A material. So very High quality.
Then both parts were connected with each other
-- 28 Ιαν 2014, 17:52 --
As a next step, the stones are needed. Just how do I attach the whole thing at different heights on the plate.
I decided to create the base for the expanding foam variant to only once.
After curing of the foam I attached the pieces with tape and screw hole on the front and back.
so .. here now for the first time finished with the stones.
All stones are fixed and hold .....
I will soon go out to get the plants to it and let's see how I best Placing in the spring.
To times to get a sense of the volume of trees.
-- 28 Ιαν 2014, 17:58 --
The planting is done in the spring of 2014 ...
Have decided on Juniper Chinensis.
Trees with beautiful movements
fine dead wood
the many material you can see on the pictures
Looking forward, when spring comes
Greeting Merlin
Δεν έχετε τα απαραίτητα δικαιώματα για να δείτε τα συνημμένα αρχεία σε αυτή τη δημοσίευση.
My Facebook Address:
https://www.facebook.com/uwe.zeiler.14
https://www.facebook.com/uwe.zeiler.14